HIVE Withdrawal Handling
SON-HIVE Functional Specifications - Hive Withdrawal Handling

1. Purpose

The purpose of this document is to outline functional specifications for monitoring Hive network and handling withdrawals. Result of a withdrawal is conversion of Peerplays assets (pHIVE and/or pHBD) to Hive (HIVE and/or HBD) using 1:1 ratio.

2. Scope

Sidechain operating node will monitor Hive network for events of interest, namely transfer of assets to a Peerplays controlled Hive address. When transfer happens, sidechain logic will process it, in order to pick up information needed to handle it. Handling withdrawals will create certain amount of tokens on a Peerplays network. This amount will match the amount of assets on target sidechain by predefined exchange rate ( In this case 1:1).
Specific functions covered include:
  • monitor transactions to a designated sidechain user address
  • handle withdrawal via creation of sidechain event data
  • create & confirm object proposals
  • conversion of pHIVE to HIVE based on defined exchange rate, with applicable fees
  • sign transactions
  • withdraw Hive for conversion into Peerplays tokens

3. Background

Withdrawal handling will consist of listener and handler functionality. Listener can identify and report new blocks, a transaction, or filtered single event (like specific operation involving specific address). Handlers will process the event identified by listener.
Requirements below are describing functional specifications based on using a Multi-signature primary wallet controlled by SON network, holding all the funds. All transfers are made to and from this multi-signature wallet.

4. Process Overview

Described here is the process of monitoring withdrawal address and processing transactions that occur in relation to a target address.
pHIVE token issue is initiated by Sidechain Listener identifying a Hive withdrawal, passing information to Sidechain Handler.
Steps involved:
  1. 1.
    User initiates withdrawal to convert pHIVE to HIVE (or pHBD to HBD)
  2. 2.
    Listener identifies withdrawal type change in the blockchain
  3. 3.
    Listener passes event data to handler
  4. 4.
    Handler receives event data and creates an object (normally SON Wallet Object, SON Wallet Deposit Object or SON Wallet Withdraw Object)
  5. 5.
    Object is checked by by all active SONs to compare object data from the chain against data generated by each SON.
    1. 1.
      If data does not match, transaction is terminated
    2. 2.
      If data matches, object is deemed 'Confirmed'. Proceed to next step
  6. 6.
    Handler checks the number of active SONs
    1. 1.
      If active SONs are > 5, proceed to next step
    2. 2.
      If active SONs are < 5, store transaction for processing until required number of active SONs is available (this step will be repeated until SON availability requirement is met)
  7. 7.
    Issue proposal for for sidechain transaction create operation
  8. 8.
    Active SONs create local copies of transaction data to be verified against proposal
  9. 9.
    Proposal is verified by active sons by comparing local copies of transaction data to proposal
    1. 1.
      If data does not match, proposal is not approved and will eventually expire thus terminating the transaction
    2. 2.
      If data matches, proposal is approved. Proceed to next step
  10. 10.
    Transaction object containing a list of SONs expected to sign is created and published to the sidechain. List of SONs will be created based on list of active SONs
  11. 11.
    Expected SON signers initiate parallel processing of transaction. Offline SONs will not participate in signing and only the online SONs (regardless of status) will sign the transaction
  12. 12.
    Sign transaction
    1. 1.
      Each signing SON adds its signature
    2. 2.
      Each signing SON is added to list of received signatures
    3. 3.
      Operation evaluator checks signatures to determine if latest signature is the last signature required to complete transaction signing
      1. 1.
        If no, repeat this step after each SON's signature
      2. 2.
        If yes, mark transaction object as 'Completed' (helper field complete = true)
  13. 13.
    Scheduled SON detects completed transaction object
  14. 14.
    Transaction is converted to a readable format and sent to Hive network
  15. 15.
    User receives HIVE amount
  16. 16.
    Withdrawal is marked as processed

5. Context

To facilitate conversion of Peerplays tokens into Hive, SON must include an event listener and an event handler mechanisms to identify specific types of transactions and handle them accordingly. Proposed approach uses multi-signature Primary Wallet controlled by SON network, holding all the funds. All transfers are made to and from this multi-signature wallet.

6. Flow Diagram

hive-withdrawal.xml
3KB
Text
HIVE Withdrawal XML

7. Requirements

Refer to Hive-SON Functional Specifications - Hive Deposit Handling for wallet information
NOTE: Current deposit address implementation is Timelocked-one-or-weighted-multisig for BTC-SON.

7.1 Listener

SON must include a Hive event listener which monitors a designated Hive address registered as a sidechain user address for withdrawals specifically, listener uses Hive node interface for monitoring changes in the block changes.
Listener must be able to recognize a change that signifies a withdrawal event and capture the following data associated with each transaction of this type:
  • Transaction unique identifier
  • Transfer operation's source address
  • Transfer operation's target address
  • Transfer amount

7.2 Handler

SON must include a Hive event handler which uses information supplied by the Listener to perform a specific operation that's based on transaction type submitted by listener. When handler receives notification of Withdrawal transaction from the Listener, sidechain_event_data must be received and passed to sidechain_event_data_received. Received sidechain event data must then be used to create proposal for a withdrawal descriptor object son_wallet_withdrawal_object.
System must then create a SON Wallet Deposit Object, which upon creation will be processed by all available SONs to verify its data. To verify object, system must check local data of each SON against object data on the side chain. Object must be deemed valid when its data is confirmed, and rejected when its data cannot be confirmed. Transaction terminates if object data is not confirmed during this check.
Successful object verification results in issuance of transaction create proposal that is based on confirmed object and includes some of its data (specifically, a reference to the object). Created sidechain transaction object must contain reference to the sidechain where it should be processed, reference to the object it is created for, sidechain transaction body, list of expected signers, list of received signatures, and the helper fields for calculating signature weights.
This proposal must be verified by SONs, which is performed by verifying referred object against locally recreated transaction data. If data does not match, proposal will be deleted from proposal list and transaction won't be completed. If data matches, system must approve the proposal. Approved proposals must result in object being published on the chain.
When the object is published on the chain, SONs specified on the list of expected signers must begin processing it in parallel. Note that SONs specified as signers must sign the transaction as long as they are online, disregarding their status (thus SON in any status must sign the transaction). Once enough signatures hve been collected, transaction is marked as 'Completed'.
When scheduled SON detects that a sidechain transaction object has been completed, it must collect all data from the sidechain transaction object, compile it, convert to a format that is ready for transmission to Hive network, and send this transaction to the Hive network.
SON must start conversion of withdrawal amount from Peerplays tokens into Hive following withdrawal confirmation. Conversion operation must calculate pHIVE to HIVE conversion using 1:1 rate. Conversion is completed by sending funds from Hive address (sidechain user address for withdrawals) to primary wallet (Hive multisig address).
User will receive Hive corresponding to amount of converted pHIVE. Lastly, scheduled SON must mark son_wallet_withdrawal_object as processed

7.3 Refunds

In some cases a transaction will not be processed by SONs (such as when active SONs threshold is not met), which will cause funds to wait until required number of active SONs become available. System must allow users to initiate refunds of their transactions.
Refund scenario must adhere to same rules as regular Hive transaction:
  1. 1.
    User needs transaction id for the transaction they wish to refund
  2. 2.
    User creates another transaction using transaction id of transaction they want to refund to move funds to their own address
  3. 3.
    User signs the transaction using a private key that matches the public key he provided in sidechain address mapping
  4. 4.
    Transaction is pushed to Hive network and user is refunded once transaction is processed

7.4 Deposit Address - One-or-weighted-multisig

This deposit address implementation type allows to send funds from this address with 2/3 weights of SON votes (like in Primary Wallet) or with single user signature. To create such address we need:
1) user public key
2) all SONs public keys
3) every SON weight
When funds are being sent from this address, system must first check if user signature is correct. When signature is correct, system completes the transaction. Otherwise, when signature is incorrect, system checks for 2/3 weights of SON votes to complete the transaction.
Note: This is the current implementation of the Deposit address for BTC-SON.
This address type is implemented by HIVE_one_or_weighted_multisig_address class.

8. Glossary

pHIVE​ is a Peerplays Blockchain Asset, which represents users' balances in Hive on Peerplays blockchain. Having a balance of 1 pHIVE would mean having it backed by the same amount of Hive on a Witness-controlled Multisig Wallet. New pHIVE are NOT ISSUED by OWNER with ​issue ​operation. New pHIVE are issued strictly in relation with ​Deposit​ operations.
pHBD, like pHIVE, is a Peerplays Blockchain Asset which represents a users' HBD balance on the Peerplays blockchain. HBD (Hive Backed Dollar) is a stable-coin on the Hive network that aims to be pegged to the United States Dollar. So 1 HBD should equal 1 USD.
PW (Primary Wallet) ​is the main Multisig Hive Wallet.
Multi-signature (multisig) refers to requiring more than one key to authorize a Hive transaction. It is generally used to divide up responsibility for possession of Hive.

Supporting Information

Hive Node - Get Transaction Node for creating a Hive node with the lowest possible required resources to support getting transactions.
Hive - Stream Blockchain Transactions to stream and detect transactions on the Hive blockchain.
How to serialize and sign Hive transactions using Javascript for Hive transactions (with multisig).
Using Multisignature Accounts for information on Hive multisig accounts.
Broadcast Ops for a list of Broadcast operations available in the APIs.